USKITS DOT OSHA Hi-Vis Compliance Kit with DOT C2 Reflective Tape for Enhanced Fleet Safety

USKITS DOT OSHA Compliant Kit with 2.5lb Fire Extinguisher and DOT-C2 Reflective Tape 

1.  DOT Compliant 2.5lb 1A10BC, UL LISTED Fire Extinguisher

- Each truck, truck tractor and bus must be equipped with fire extinguishers.

- Fire extinguishers must be easily accessible and securely mounted so they don't move during transport.

- Comes with metal mounting bracket

2.  DOT Complaint Set of 3 DOT Triangles in the plastic Box

- Federal Motor Vehicle Safety Standards (FMVSS)

- FMVSS 125 - Warning devices

- Acrylic plastic strip reflectors, hermetically sealed and impervious to dust and moisture, unfolds to a triangular shape and are held firmly into place with a sturdy-locking device

- Interior strips of molded florescent plastic provide effective warning for daytime use

- Airflow design helps reduce wind resistance

- Exclusive wire bracing controls degree of tilt, even in extreme wind conditions

- High impact molded plastic box

- Easy to erect, single triangle flare unfolds from a weighted blow molded tube that serves as a base and is equipped with non-slip foam pads

- Permanently printed placement instructions on case and triangle

- Meets or exceeds all DOT standards and requirements of FMVSS125

3. Set of 12 Electrical Fuses. 6 Standard and 6 Mini 

- Each truck, tractor trailer, and bus must be equipped with spare fuses to remain DOT compliant.

4.  10-Person, Bulk ANSI A Weatherproof First Aid Kit, Plastic Case - Kit complies with ANSI 2021 standards and meets or exceeds federal OSHA regulations 

	10-Person, Bulk ANSI A Weatherproof First Aid Kit, Plastic Kit complies with ANSI 2021 standards and meets or exceeds federal OSHA regulations 16 Plastic Bandages, 1”x3”   2 First Aid Tape 0.5"x2.5yds 10 Triple Antibiotic Packets 10 BZK Antiseptic Towelettes   1 CPR Mask w/One Way Valve   1 Burn Gel Dressing 4”x4” 10 First Aid/Burn Cream, 0.9g   1 Cold Compress   2 Eye Pads   1 Eye Wash, 1oz   10 Hand Sanitizer Packets 0.9g   4 Nitrile Gloves   1 Conforming Gauze roll 2"   1 Metal Scissors   2 Gauze Dressing Pads, 3"x3"   2 Abdominal Trauma Pads, 5"x9"   1 Triangular Bandage, 40”x40”56”   1 Emergency Foil Blanket, 52"x84"   1 First Aid Guide
	Class 2 ANSI Compliant Reflective Vest
	Hi Viz Work Gloves- Yellow/Orange

DOT C2 Reflective Tape: Per Section 571.108 - Standard No. 108 each vehicles, trucks, trailers, and buses, 80 or more inches in overall width must be equipped with reflective devices.  Must cover at least 50% of the side with red and white tape for back and bottom and silver or white for upper rear of trailers Our tape: DOT certified and guaranteed to meet and exceed NHTSA requirements Complies with Federal Motor Vehicle Safety Standard 108, exceeds NHTSA requirements and is certified DOT-C2 Material pre-cut into 10 - 2 inches wide and 12 inches long strips for easy of use  Total 120"   DOT approved reflective tape provides excellent visibility from all angles both day and night for increased safety Easy to apply acrylic tape sticks to a variety of surfaces including fiberglass, aluminum and painted steel

Kit Weight: 26lbs

This kit helps to be compliant with DOT, OSHA regulations

Personal or commercial, a vehicle should comply with federal transportation requirements, and emergency kits are no exception. Compact and with all basic emergency signaling devices, our DOT-compliant car kits meet or exceed all FMVSS 125 and CFR 49 requirements. All large trucks, Vans on the highway, and many other vehicles, are required to have these items. 

---

Available Options